The FLO-FAST 17 oz. Plastic Diesel Exhaust Fluid (DEF) Pump for Containers is designed for a variety of DEF transfer applications. The professional-model pump, coupled with our patented technology, is designed to fit on the FLO-FAST containers. In addition, the DEF container pump can adapt to industry-standard 15, 30 and 55 gal. barrels with a bung adapter. The pump has three internal vanes that build pressure to pump and draw fluid at very high rate of 8 gal. per minute. The diesel exhaust fluid pump material and construction is made to last and will get your fluid transfer operations done safe, fast and with ease.

• Pumps or draws (siphons) up to 8 gal. per minute (GPM)
• Corrosion resistant 3-vane rotary DEF pump
• Telescoping draw tube allows the flexibility to own multiple size containers with the need for only 1 pump
• Cap includes an EPDM O-ring
• DEF container pump is made in the USA
• Opening diameter: 0.75 in.; maximum fill capacity: 17 oz.
• Comes in black
• Dimensions of the diesel exhaust fluid pump: 10 in. L x 14 in. W x 44.5 in. H; weighs 9 lb.
• Backed by a 1 year warranty
• Made of a plastic composite material that is compatible with DEF
• Double-seal technology in effect holds up with all types of fluids, even the harshest chemicals
• Self-priming construction allows for convenient use
• Includes pump housing, container cap, main draw tube, handle, 5 ft. of hose, relief spring, tether with plug and static line and telescoping draw tube
• Before pumping and drawing: make sure safety tether squeeze clamp is attached to the equipment, utility vehicle or boat before transferring fluid; the purpose of the squeeze clamp is to ensure the hose will stay in the filler opening
• Pumping and drawing: when pumping or drawing fluid with the FLO-FAST pump, you must properly vent the system; turn vent counterclockwise (turns into container) to open vent and clockwise (vent turns outward) to close the vent; if you are using the FLO-FAST pump with fluids that do not lubricate, over time you may have to prime the pump if you are trying to pump or draw fluid with a dry pump; you may need to prime the pump if you are trying to draw or suck fluid from more than 7 ft. away (each pump comes with 5 ft. of hose); 5 ft. accessory extension is for pumping purposes; if you are pumping or drawing at a rate of more than 60 revolutions per minute, you run the risk of over pressurizing the pump
• When fluid transfer is complete: carefully raise the line out of the fluid opening and let any residual fluid drain back into the system container; do not set the hose down until all of the fluid has drained back into the container; place plug on the tether line into the aluminum tube to seal the hose; before removing the pump system from containers, make several counterclockwise rotations to pull residual fluid out of the pump housing; leave the pump on container for a minimum of 15 minutes to ensure any fluid inside the pump housing drains back into the container; always remove the FLO-FAST pump from the container and place the original cap back onto the container to properly seal and store fluid; to eliminate any person from pumping fluid accidentally, do not store the FLO-FAST pump in the container; always return the pump and system to a safe area where children/others do not have access to it
• Warnings; never allow individuals under licensed age to use the FLO-FAST pump or system; never let anyone use the FLO-FAST system or containers that has not read this instruction sheet in full; do not transport the FLO-FAST pump while it is in a container; only use the FLO-FAST pump on industry standard largemouth containers; pouring from these containers can be dangerous and is not recommended with a volatile or combustible fluids; for that reason, we have designed the FLO-FAST pump system to safely transfer these fluids; do not use the FLO-FAST pump on any container that does not fit the FLO-FAST pump; if you choose to use FLO-FAST with any type of volatile fluid like gasoline, methanol, kerosene or any harmful chemical, do not inhale vapors; when filling a container, always place the container on the ground; to allow for fluid expansion, do not overfill the container beyond manufacturers specified levels; if any component breaks on the FLO-FAST portable fluid transfer pump or system, do not use until you have replaced all of the broken components